Madeira Super Film Iron Away Stabilizer
£18.70
In Stock.
Madeira Super Film Iron Away Stabilizer. Size 30cm x 5m
Special heat dissolvable clear and perforated stabilizing film. Dissolves when subjected to heat and allows embroidery work to be carried out on extremely fine fabrics, stretch fabrics and on normal cotton fabrics. Super Film is also especially suitable for the embroidery of emblems or logos without fabric.
Embroidery of emblems and logos: cut the desired length of SUPER FILM from the roll and stretch into an embroidery frame. Use multi‐layers of the film according to the structure of the embroidery. One of the layers should be placed with the smooth side facing upwards. When using two layers, both layers of the film should be placed with the rough sides facing each other, when using three layers, place the rough side on top of the smooth side of the second layer. Then embroider the desired emblem/logo. After completion of the embroidery, remove the emblem/logo from the SUPER FILM. Remove the film residue by means of an iron or a heat press . Do not leave the iron stationary when ironing, but make circular movements over the embroidery. The iron should be set to a temperature of 2 points, however, if necessary, whilst taking great care, the temperature may be increased to 3 points. When using a heat press, the embroidery should remain in the press for approximately 10 – 20 seconds at a temperature of approximately 120° C (248°F).
Embroidery of delicate and stretch fabrics: cut the desired length of SUPER FILM from the roll and place it underneath the fabric that is to be embroidered. Stretch both the
fabric and the backing firmly into the embroidery frame. Either carefully tear away the superfluous film on the outside of the embroidery or cut the film away close to the edge. Any remaining film can be melted away as described above.
Note: always keep SUPER FILM enclosed in the clam shell pack. This will protect your embroidery backing from dirt, damp and dehydration.
100% Polyester
Special heat dissolvable clear and perforated stabilizing film. Dissolves when subjected to heat and allows embroidery work to be carried out on extremely fine fabrics, stretch fabrics and on normal cotton fabrics. Super Film is also especially suitable for the embroidery of emblems or logos without fabric.
Embroidery of emblems and logos: cut the desired length of SUPER FILM from the roll and stretch into an embroidery frame. Use multi‐layers of the film according to the structure of the embroidery. One of the layers should be placed with the smooth side facing upwards. When using two layers, both layers of the film should be placed with the rough sides facing each other, when using three layers, place the rough side on top of the smooth side of the second layer. Then embroider the desired emblem/logo. After completion of the embroidery, remove the emblem/logo from the SUPER FILM. Remove the film residue by means of an iron or a heat press . Do not leave the iron stationary when ironing, but make circular movements over the embroidery. The iron should be set to a temperature of 2 points, however, if necessary, whilst taking great care, the temperature may be increased to 3 points. When using a heat press, the embroidery should remain in the press for approximately 10 – 20 seconds at a temperature of approximately 120° C (248°F).
Embroidery of delicate and stretch fabrics: cut the desired length of SUPER FILM from the roll and place it underneath the fabric that is to be embroidered. Stretch both the
fabric and the backing firmly into the embroidery frame. Either carefully tear away the superfluous film on the outside of the embroidery or cut the film away close to the edge. Any remaining film can be melted away as described above.
Note: always keep SUPER FILM enclosed in the clam shell pack. This will protect your embroidery backing from dirt, damp and dehydration.
100% Polyester
Product Reviews
3.7 out of 5, based on 3 reviews
Verified Customer Reviews:
Easy to use and great quality.
Madeira stabilisers are the best quality I have found. They work well and for heavy embroidery add a layer to help keep the stitches neat and then iron away easily when finished.
Teacupdoll - BucksI found it difficult to remove all the film with my iron. I wouldn’t rush out to buy this product again.
Jo - WexfordLove this and bought 2 to make sure I dont run out .
Anonymous -
Write a customer review
Tell us what you think of this product using the form below (please fill in all fields).
Please note your name may be published on this page and any other details stored in line with our privacy policy. Reviews are subject to verification before they are published.